Skip to Content
  1. Products
  2. Marine

Marine

Default
Sort By: Featured

Marine

Drill Pipe Handling Tool - 1800mm
Drill Pipe Handling Tool 1800mm
$ 1,150.00 1150.0 AUD
Stiffy Hand Safety Tool with Push-Pull Head – 50"
Stiffy Hand Tool With Push-Pull Tooling Head 50"
$ 901.00 901.0 AUD
Drill Pipe Handling Tool - 1200MM
DRILL PIPE HANDLING TOOL 1200MM
$ 1,056.00 1056.0 AUD
Stiffy Hand Safety Tool with Push-Pull Head – 72"
$ 1,050.00 1050.0 AUD
Hook and Moor M60 - 4.2m Telescopic
$ 495.00 495.0 AUD
MDC (M12) Female Shielded Cordset
MDC, Cordset, Shielded Cable, Not shielded to coupling nut, 5 Pole, Female Right Angle, 10M, 4A, Yellow, PVC, Nickel Plated Brass
$ 115.00 115.0 AUD
Double Inlet Air Centrifugal Fan RDH 250 K
$ 2,500.00 2500.0 AUD
Inline Blower 24v. 1000 MCB Flange-Mnt
Not Available For Sale 0.0 AUD
Rule Tournament 400 Dual Port Livewell Pumps Angled – 500GPH 12 Volt 401C
Not Available For Sale 0.0 AUD
4 Core & Earth 1.5mm2 XLPE/CWB/SHF1 LSHF
Screened Shipboard Cable Black 0.6/1KV
Not Available For Sale 0.0 AUD
UNITOR Metal Brite 25ltr
Not Available For Sale 0.0 AUD
Cortec VpCI-105(15000092) Emiiter
20 per carton
Not Available For Sale 0.0 AUD
EWP80 Kit Remote Electric Water Pump (12V)
Not Available For Sale 0.0 AUD
G402 Band-It Giant Banding Tool (Suitable for 1-1/4”in / 32mm Banding)
Not Available For Sale 0.0 AUD
KASHON Hydraulic Flange Spreader
from $ 125.00 125.0 AUD per Day
KASHON 10 Ton Single Acting Hydraulic Cylinder Kit
from $ 145.00 145.0 AUD per Day
All Oceans Compensator Pressure 5 Psi
Not Available For Sale 0.0 AUD
Floor Mount Slewing Jib Crane 6T x 4000mm
Capacity: 6 Tonne
Span: 4m (14 feet)
Height Under Boom (HUB): 5m
Rotation: 360 degrees
Accessories: Electric Wirerope Winch
Test certification Bureau Veristas
Not Available For Sale 0.0 AUD
Midori POTENTIOMETER, 3 x 2K Ohm
Not Available For Sale 0.0 AUD
Stiffy Snare Tool Type 2 Dual Release - 36"
Not Available For Sale 0.0 AUD
2000 Nm Load Cell - Static Torque Sensor & Transducer
$ 1,027.00 1027.0 AUD
Finger Saver Tool - 350mm
$ 154.00 154.0 AUD
OMC-160 Wind Speed & Direction Sensor (D)
Wind sensor combined in-line sensor st. Combined wind speed and direction sensor, made of stainless steel. In-line sensor with rotating cup anemometer and wind vane with
side fitting Including:

OMC-167 Mounting bracket complete with junction box and clamps. RS-422 NMEA, set to 9600 baud rate
$ 5,100.00 5100.0 AUD